Simplicity 14E User's Guide download pdf (Page 6)

AN0821

6 Rev. 0.1

1. After creating a new MCU project using Simplicity Configurator, Studio will automatically switch to the

Configuration perspective. This perspective is tailored specifically for use with Configurator to initialize

MCU peripherals. Special views will automatically be displayed in this perspective that allow peripheral

registers to be configured. The default tab in a new Configurator project is the Port I/O tab.

2. Studio will automatically validate register configuration values and display any errors or warnings in the

Problems view. Disable the watchdog timer to fix the warning:

a. Double clicking on a warning or error will automatically display the property that raised the problem.

Double click on the Watchdog timer warning to automatically switch to the Peripherals editor and

display the Watchdog Timer properties in the Properties view.

b. The Peripherals tab shows all of the hardware peripherals that Configurator can generate initialization

code for. Peripherals are grouped by categories such as Analog, Communications, Core, and

Timers.

c. Check the check box next to a peripheral to indicate that Configurator should generate code for the

checked peripheral module. Selecting a peripheral will display the peripheral properties for the

selected peripheral in the Properties view.

d. Disable the watchdog timer to prevent unwanted device resets from occurring. Select the WDT Enable

property in the Properties view and select Disable from the combo box. Press enter or deselect the

property to confirm the new property value.

e. The watchdog timer warning in the Problems view should now disappear, indicating that the problem

has been solved.

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

No comments

Simplicity 14E User's Guide Page 6