Simplicity 7800070 Specifications download pdf (Page 21)

Assembly

Figure 18. Installing the Chipper Cone

A. 1/4=20 × 3/4 Screw, Washer, & Hut

B. 5/16-18 Flange Hut

C. Cone Base

D. Chipper Cone

initial Assembly

Install Chipper Cone - All Models

1. Secure the chipper cone (D, Figure 18) to the chipper

cone base (C) using 1/4-20 x 3/4 screws, washers,

and nuts (A).

2. Position the chipper cone base (C) over the three

5/16-18 threaded studs protruding from the engine

plate, and attach using three 5/16-18 flange nuts (B).

3. Tighten the flange nuts securely.

Install the Hopper - All Models

1. Attach the hopper to the rotor housing. Make sure to

engage the metal lip of the hopper liner inside the

housing.

2. Secure the hopper to the rotor housing using two

5/16 x 1/2 hex head bolts and two 5/16 flat washers

(Figure 19). Do not tighten hardware at this time.

3. See Figure 20. From the inside of the hopper install

one 5/16-18 x 3/4 hex head bolt, 5/16 Iockwasher,

and 5/16 flat washer into each of the upper and lower

holes of the metal hopper liner. Finger tighten only at

this time.

4. Check that the hopper is seated correctly and tighten

all hardware.

Figure 19.

Figure 20.

Attaching the Hopper

installing Hardware inside the Hopper

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

No comments

Simplicity 7800070 Specifications Page 21