Simplicity ZT2148 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 41
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
5
Safety Rules & Information
SERVICE AND MAINTENANCE
Keep nuts and bolts, especially blade attachment
bolts, tight and keep equipment in good condition.
Never tamper with safety devices. Check their proper
operation regularly.
Keep unit free of grass, leaves, or other debris build-
up. Clean up oil or fuel spillage.
Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
Never make adjustments or repairs with the engine
running unless specified otherwise in the engine
manufacturers manual.
Grass catcher components are subject to wear, dam-
age, and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently check
components and replace with manufacturers recom-
mended parts, when necessary.
Mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves, and use extra caution when
servicing them.
Check brake operation frequently. Adjust and service
as required.
Use only factory authorized replacement parts when
making repairs.
Always comply with factory specifications on all
settings and adjustments.
Only authorized service locations should be utilized
for major service and repair requirements.
Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous opera-
tion, equipment damage and voiding of manufactur-
ers warranty.
WARNING
STORED ENERGY DEVICE: Improper release of
the deck lift assist spring can result in serious
personal injury.
Spring should be removed by an authorized dealer
only.
WARNING
Hydraulic fluid escaping under pressure may
have sufficient force to penetrate skin and cause
serious injury.
If foreign fluid is injected into the skin it must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may
result.
Keep body and hands away from pin holes or nozzles
that eject hydraulic fluid under high pressure. Use
paper or cardboard and not hands to search for leaks.
Make sure all hydraulic fluid connections are tight and
all hydraulic hoses and lines are in good condition
before applying pressure to the system.
If leaks occur, have the unit serviced immediately by
your authorized dealer.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Comments to this Manuals

No comments