Simplicity Serge Pro SW432 Instruction Manual download pdf (Page 34)

Returning to 3 or 4-Thread Overlock

1. Open the front cover and rotate the handwheel forward to

bring the upper looper to its lowest position.

2. With your index finger or tweezers, release the subsidiary

looper from the eye of the upper looper. Rotate it further to

the right until it snaps back into place and out of the way.

3. While holding the machine lock button down, rotate the

handwheel forward until the button locks into place.

Rethread the upper looper (see page 11). For 4-thread

serging, replace the second needle (see page 48).

Rethread the needle (see page 13). Release the machine

lock button.

4. Close the front cover

5. Lower the foot and sew a test stitch.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

No comments

Simplicity Serge Pro SW432 Instruction Manual Page 34