Simplicity Sno-Away 6137 & Up Operator's Manual download pdf (Page 32)

L1102 © Trynex International 2007

5 — 32

Opti-Flow Installation Instructions

Step 1: Remove original baffles and plug holes with supplied hardware.

Step 2: Position new style baffle so there is no gaps, baffle is designed to be self locating.

Step 3: Mark and drill holes.

Step 4: Install supplied hardware the same way as original baffle was. Nut and washer should be on exterior surface.

Step 5: Center the Opti-Flow vibrator horizontally and 6-1/2" below apron (see illustration below) mark and drill holes.

Step 6: Mount vibrator with cord pointing down using supplied hardware. Please note: there are SPECIAL DOMED WASHERS that must be

positioned properly. Please refer to standard vibrator instructions for details regarding harness installation, etc.

6-1/2”

CORD FACING DOWN

OPTI-FLOW VIBRATOR

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Simplicity Sno-Away 6137 & Up Operator's Manual Page 32