Simplicity sw210 User Manual download pdf (Page 29)

BUILT-IN STITCHES – “S” STRETCH RANGE

DECORATIVE RIBBON CASING

Create decorative casings for 1/8” narrow ribbon in minutes.

Place the fabric right side up under the presser foot.

Insert the ribbon through the front opening of the press-

er foot, over the front and under the back. Leave a 1/2”

tail of ribbon behind the foot. Begin sewing being care-

ful not to stitch the ribbon [Fig. 1]. Straight stitch one

end of the ribbon in place and push the fabric from the

other end along the ribbon until the desired fullness is

achieved. Straight stitch the other end in place.

DECORATIVE PICOT HEM

The elastic overlock stitch can be used to create a lovely

picot or scallop edge.

Increase upper thread tension slightly by turning the dial

to a higher number [Fig. 2].

Fold under the edge of the fabric to be stitched.

Place the fabric to the right of the foot, with the fabric

edge to the left of the foot. Sew along the folded edge of

the fabric so the left needle swing drops just over the fab-

ric edge [Fig. 3]. The zigzag of the stitch puckers the

edge to create a dainty scallop.

Return the tension to its normal setting when sewing is

complete.

STITCH “E” - ELASTIC OVERLOCK

Fig. 1

Ribbon casing

Fig. 2

Picot edge

Fig. 3

RANGE STITCH WIDTH LENGTH FOOT

S E 5 4 All-purpose

RANGE STITCH WIDTH LENGTH FOOT

S E 5 4 All-purpose

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

No comments

Simplicity sw210 User Manual Page 29