Simplicity 3424 Specifications download pdf (Page 123)

111

User Guidelines

Command in the Interface Range gigabitEthernet Mode is executed

independently on all ports in the range. It does not effect the execution on the

other ports at all if the command results in an error on one port.

Example

To enter the Interface range gigabitEthernet Configuration Mode, and configure

ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list:

TL-SG3424(config)# interface range gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9

description

Description

The description command is used to add a description to the Ethernet port. To

clear the description of the corresponding port, please use no description

command.

Syntax

description string

no description

Parameter

string —— Content of a port description, ranging from 1 to 16 characters.

Command Mode

Interface Configuration Mode (interface gigabitEthernet)

Example

Add a description Port #5 to port 5:

TL-SG3424(config)# interface gigabitEthernet 1/0/5

TL-SG3424(config-if)# description Port#5

shutdown

Description

The shutdown command is used to disable an Ethernet port. To enable this port

again, please use no shutdown command.

Syntax

shutdown

no shutdown

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 211 212

No comments

Simplicity 3424 Specifications Page 123