Simplicity 3424 Specifications download pdf (Page 127)

115

Parameter

rate —— Select the bandwidth for receiving multicast packets on the port. The

packet traffic exceeding the bandwidth will be discarded. By default, the value is

“128K”.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the multicast control function for port 5:

TL-SG3424(config)# interface gigabitEthernet 1/0/5

TL-SG3424(config-if)# storm-control multicast

storm-control unicast

Description

The storm-control unicast command is used to enable the unicast control

function. To disable the unicast control function, please use no storm-control

unicast command. Unicast control function allows the switch to filter UL frame

in the network. If the transmission rate of the UL frames exceeds the set

bandwidth, the packets will be automatically discarded to avoid network

broadcast storm.

Syntax

storm-control unicast [ rate rate ]

no storm-control unicast

Parameter

rate —— Select the bandwidth for receiving UL-Frame on the port. The packet

traffic exceeding the bandwidth will be discarded. By default, the value is

“128K”.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the unicast control function for port 5:

TL-SG3424(config)# interface gigabitEthernet 1/0/5

TL-SG3424(config-if)# storm-control unicast

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 211 212

No comments

Simplicity 3424 Specifications Page 127