Simplicity 3424 Specifications download pdf (Page 147)

135

TL-SG3424(config)# interface range gigabitEthernet 1/0/1-3

TL-SG3424(Config-if)# loopback-detection

loopback-detection config

Description

The loopback-detection config command is used to configure the

process-mode and recovery-mode for the ports by which the switch copes with

the detected loops.

Syntax

loopback-detection config [ process-mode { alert | port-based }]

[ recovery-mode { auto | manual }]

Parameter

process-mode —— The mode how the switch processes the detected loops.

Alert: When a loop is detected, display an alert. Port based: When a loop is

detected, display an alert and block the port.

recovery-mode —— The mode how the blocked port recovers to normal status.

Auto: Block status can be automatically removed after recovery time. Manual:

Block status can only be removed manually.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Configure the loopback detection process-mode as port-based and

recovery-mode as manual for port 2:

TL-SG3424(config)# interface gigabitEthernet 1/0/2

TL-SG3424(config-if)# loopback-detection config process-mode port-based

recovery-mode manual

loopback-detection recover

Description

The loopback-detection recover command is used to remove the block status

of selected ports, recovering the blocked ports to normal status,

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 211 212

No comments

Simplicity 3424 Specifications Page 147